Harmony® 525 Advanced Universal Remote
- Dokumentation
- Fås ikke til dette produkt
- Reservedele
- Se alle
- Garantioplysninger
- 2 års begrænset hardwaregaranti
Spørgsmål og svar
Hvad er dette?
Hvad er maskinoversættelse (MT)
Dette websted for Logitechs kundesupport bruger Google Translate™-oversættelsestjenesten, et tredjeparts oversættelsesværktøj som Logitech ikke styrer. Vær opmærksom at ingen automatiseret eller computerbaseret oversættelse er helt præcis og skal ikke træde i stedet for traditionelle oversættelsesmetoder. Oversættelsen skal kun anvendes som vejledning. Logitech garanterer ikke for nøjagtigheden, pålideligheden eller betimeligheden af oplysninger der er oversat af dette system og er ikke ansvarlig for pådraget tab som følge af brug af dette system. Hvis der opstår spørgsmål vedrørende nøjagtigheden af oplysningerne i den oversatte udgave, skal du læse den engelske. Den officielle tekst er den engelske sprogversion.
- Sådan finder du komponentens producentnavn og modelnummer
- Sådan føjes Logitech Revue til aktiviteten Se tv med Logitech Harmony-softwaren
- How do I know if a Harmony remote will control all of my equipment?
- Adding a device to the Harmony Remote
- Upgrading/Reapplying the firmware on your Harmony Remote
- Pairing your Logitech Harmony Adapter for PS3™ to your PLAYSTATION®3
- Disabling the firewall on Mac OS X Snow Leopard (10.6) and Lion (10.7)
- Adjusting how a Harmony remote turns a device on or off
- How to control multiple Apple devices with the Harmony remote
- Controlling a PLAYSTATION®3 with a Harmony remote
- Using the Harmony remote to control Apple products that use the Apple remote
- How do I remove a device from my Harmony Remote?
- Disabling LG SIMPLINK
- Controlling a Bose receiver with a Harmony remote
- Learning commands to the Harmony remote in RAW
- Transferring your settings from an old Harmony Remote to a newer or different model
- Adding commands to be sent at the start or end of an Activity for a Harmony Remote
- How to test if your TV or AV receiver can go directly to an input with a single button press
- Controlling a multi-zone AV Receiver with a Harmony remote
- Adding an HDMI Switch to the Harmony remote
- How do I reset the password or find the Login ID for my Harmony remote account?
- Uninstalling the Harmony remote software
- Deleting everything and starting the Harmony setup again
- Controlling a Digital Media Receiver or Digital Video Player to a Harmony remote
- Determining if a device uses an RF (radio frequency) or IR (infrared) remote control
- Setting a Harmony remote to not power off devices when switching between Activities
- Learning a command from your original remote to the Harmony remote
- Controlling Bose Lifestyle 18, 28 and 35 Home Entertainment Systems with a Harmony remote
- Replacing a home theater component on a Harmony remote
- Sending more than one power command to a device
- Adding an additional device to an Activity for your Harmony Remote
- How do I change the language on my Harmony remote?
- Mapping a Sequence of commands to a single button on the Harmony remote
- Detecting the DISH Network or Bell TV remote address on the Harmony remote
- Removing the batteries from a Harmony 720, 785 or 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360)
- Adding an Activity to the Harmony Remote
- Renaming an Activity on the Harmony remote
- How to customize buttons for a Harmony 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360) in an Activity
- Setting up an Activity to sometimes use the AV Receiver for sound
- Adding an Activity that does not fit into any category in the Logitech Harmony Remote Software
- Disabling Philips EasyLink
- Accessing and using Device mode on a Harmony 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360)
- How to create an Activity to control a PLAYSTATION®3 using the Logitech Harmony Adapter for PS3™
- How do I change the order in which devices are powered on in an Activity when using my Harmony remote?
- How do I remove an activity from my Harmony Remote?
- Changing the order Activities appear on a Harmony remote
- How do I adjust the backlight (Glow) timing on my Harmony Remote
- I accidentally learned the wrong IR command into my Harmony remote and I would like to delete it
- The Harmony software displays that there are updates available for my device. How do I add the updated version of my device?
- Tutorial: How can I add my X10 light controller?
- Changing the order of devices in Device Mode
- Removing unwanted commands from device mode on a Harmony remote
- Upgraded my Harmony remote and want to use my old Harmony remote to control new devices
- Using a Harmony remote with a Television that uses SCART connectors
- Turning off your devices with the Harmony remote
- I own multiple Harmony remotes and I would like to set them up to control different components
- Adding a Blu-ray player to the Harmony remote
- Produktsupport til og enhedskompatibilitet med Windows 8
- Kan du ikke finde det du leder efter?
- VIDEO: Harmony remote control "Activities" explained
- Contacting Support for the Harmony remote
- Can I use a Harmony RF Wireless Extender with any Harmony remote
- Battery Life in the Harmony Remote
- Difference between IR and RF remotes
- Updating the Harmony remote without an Internet connection
- How long does my Harmony Remote warranty last?
- Choosing the right Watch TV Activity for your Harmony remote
- Logitech Harmony Client Software 7.7 Release Notes
- Warranty for the Harmony 555 and 525 Advanced Universal Remote
- Harmony Video Tutorial: What is an Activity
- Are there German online forums for the Logitech Harmony Remote?
- Harmony Software Download
- Manuals for Harmony 525 Advanced Universal Remote
- Manuals for the Harmony Adapter for PS3
- Komponenten skifter til den forkerte indgang eller tænder igen efter Harmony-fjernbetjeningen er blevet brugt til at slukke for den
- Harmony-fjernbetjeningen tænder/slukker ikke komponenterne korrekt
- My Harmony Remote has stopped working. What should I do?
- Troubleshooting: Harmony Remote Software freezes during install on Windows PC
- I am having difficulty adding a device to my Harmony remote
- My Harmony remote sends commands too slowly when I press a button when in an Activity (Adjusting the Inter-key Delay)
- My Harmony remote was programmed by a professional installer and I don't know my Harmony Login ID and/or password
- Unable to learn a command from the original remote
- My Harmony remote doesn't switch between Activities correctly without having to use the Help button (Adjusting the Inter-Device Delay)
- I receive the Step failed Adding text to an XML document must not be null error message when updating my Harmony remote
- My Activities never work correctly when first powering on my devices with my Harmony remote (Adjusting the Power On Delay)
- Batteries are draining quickly on my Harmony remote
- My Harmony® 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360) appears frozen and only displays "Safe Mode" on the LCD screen
- My Harmony remote sends a command multiple times on a single button press
- The Logitech Harmony Remote software tells me my remote is defective and has been disabled
- My TV always stops short of the correct input when switching Activities using my Harmony remote (Adjusting the Input Delay)
- My Bell ExpressVU PVR/Satellite is not responding to my Harmony remote
- My Dish Network PVR/Satellite is not responding to my Harmony remote
- My Xbox 360 is not responding to my Harmony remote
- PlayStation 3 game controllers do not work after pairing the Logitech Harmony Adapter
- The Logitech Harmony Remote software freezes at 3% when I try to update my Harmony remote
- A button on my 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360) isn't working correctly
- My device manufacturer is not listed in the Logitech Harmony Remote Software
- Vizio TV not switching to the proper input
- Panasonic TV not switching to the proper input
- Program compatibility error message when installing Logitech Harmony® Remote Software on Windows 7
- My Harmony 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360) appears frozen and only displays "Welcome to your Remote" on the LCD screen
- Troubleshooting: Constant session timeout error message with Harmony software
- My DirecTV PVR / Satellite is not responding to my Harmony remote
- When setting up a Watch TV Activity for my Harmony Remote I receive the message "None of your devices can change channels"
- I receive the error Unable to Display Content when updating my Harmony remote
- When I start an Activity that uses a Samsung LCD TV none of my devices respond to my Harmony remote
- My Harmony 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360) is no longer controlling any of my devices
- Should the backlight (glow) on my Harmony 520, 525, 550, 555, or Harmony Advanced Universal Remote for Xbox 360 turn on when I pick it up?
- The backlight (glow) on the Harmony remote does not turn on when the Glow button is pressed
- My PlayStation 3 is not powering off with my Logitech Harmony Adapter
- My Harmony Remote doesn't control one of my devices and its original remote is broken
- Harmony 500 series remotes (510, 515, 520, 525, 550, 555, 360) I don't see a picture after starting an Activity using my Harmony 500 series remote (including the Harmony Advanced Universal Remote for Xbox 360)
- Why don't the names of commands in the Logitech Harmony Remote software match the names of the buttons on my original remote?
Sådan gør du
Reference
Konfiguration af produktet
Problemløsning
- Download af software
- Hent installationsprogrammer, drivere, opdateringer m.m.
Butikken med reservedele
Hvis en del af dit Logitech-produkt bliver væk eller går i stykker, behøver du ikke købet et helt nyt. Du kan finde den reservedel du mangler, lige her.
Læs mere.
Skift sted
